Firma Nyheder

PPR Pipes Safe Use kan garanteres

2018-11-15

The popularity of home decoration to promote the prosperity of the building materials market, PPR Pipesline is used in every home decoration materials used in water, and now the building materials market, PPR Pipesline variety, brand million, highly competitive. Many of which there are some PPR Pipesline to poor quality impact on the market, shoddy, consumers can not distinguish from the surface.

Dårlig kvalitet PPR Pipesline liv er kort, kan kun bruge 1 til 2 år, forbrugerne har valgt en ringe kvalitet PPR Pipesline, på kort sigt, det vil lække, briste rør og andre ulykker, kan netop renoveret nyt hjem ødelægges. enkelt gang.

Autentiske PPR-rør under normale forhold, levetiden på op til 50 år, PPR Pipesline ikke-højteknologiske produkter, bestemmer kvaliteten af ​​PP-R nøglen i råmaterialerne

Hvordan man vælger det rigtige rør til den rigtige pris er en meget vigtig ting for dem. Den følgende opskrift, lærer dig, hvordan du identificerer PPR-røret, er godt eller dårligt:

Whether the texture is delicate, whether the particles are uniform. PPR tube is now on the market mainly white and gray green several colors, under normal circumstances, recycled plastic can not do white, so many people tend to think that white is the best, in fact, this view more one-sided. With the technical update to improve, the color is not a good standard to identify PPR Pipes. Tube is good or bad, that can not solve the problem, touch, rough particles may be mixed with other impurities.

With or without smell. PPR Pipes is the main material of polypropylene, good pipe without smell, poor there are strange taste, it is likely to be mixed with polyethylene, rather than polypropylene.

PPR tube with a considerable hardness, casually can be pinned into a deformation of the tube, certainly not PPR tube.

Godt PPR-rør, "fjedrende" Godt, for nemt at smadre naturligt ikke et godt PPR-rør. Men hårdheden er ikke lig med godets elasticitet, hvordan man smadrer det ødelagte PPR-rør, bliver vi nødt til at tvivle. Fordi nogle ulovlige producenter ved at tilføje for meget calciumcarbonat og andre urenheder for at forbedre rørets hårdhed, således at røret med lang tid er udsat for sprød brud.

Ignite a burning, very intuitive and very useful. Raw materials mixed with recycled plastic and other impurities in the PPR tube will be black smoke, pungent smell; good material not only will not smoke after burning, no smell, after burning, the molten liquid is still very clean.

Til installation af PPR Pipess kan vi ikke være så professionelle, men forstå, at de mest grundlæggende svejsestrin kan hjælpe os med bedre at kontrollere om installationen af ​​vandrør er i overensstemmelse med normerne, så sikker brug af vandrør kan garanteres.

1, overfladen af ​​røret og leddene for at sikre ren, glat, ingen olie.

2, need to mark in the pipeline to try to insert. (Equal to the fitting depth of the joint).

3, the entire embedded to carry out the depth of heating, including pipes and joints, are carried out in the welding tool.

4, to complete the heating time,PPR Pipes the pipeline smoothly and evenly pushed into the joints, so that their combination of solid and perfect.

5, in the pipe joints after welding within a few seconds, you can adjust the connector position.

6, på kort tid kan konnektoren være med belastningen.

7, with a self-adjusting hot-melt welding machine to pipe and pipe welded together, the temperature is 260 ° C.

8, the machine connected to the power (220v) and wait for a moment, when the green light flashing that has reached the welding temperature, began to work.

9, because the material is light, flexible, all welding can be carried out on the table, this advantage can save man-hours.

10, sometimes in the wall to make some connections, we should pay attention to the joint location in the operation space, you can operate. If the ambient temperature is below 5 ° C, the heating time is increased by 50%.